- #Fusion 10 configure os x vm nat connection how to#
- #Fusion 10 configure os x vm nat connection windows#
Many VPN solutions exist, but for those companies that cannot afford a high-end Cisco or Juniper solution, a regular Windows Server 2012 installation can be used to provide VPN access into your network. For these reasons and many more, it is imperative that even small businesses have some sort of VPN technology that works across the range of devices used throughout their business.
As mobile technologies are certainly going to gain even further in popularity, it is important for workers to be able to access office resources from remote locations and have a method of protecting their communications when connected to insecure Wi-Fi hotspots. Now as you have set up the Network Prefs correctly you should be able to connect trough your router, if the WAN is set up correctly which in your case I am not quiet sure because I have not set up ADLS yet only DSL, but you can try different configurations on your router then to check which one will establish a connection to your ISP.While it can sometimes be difficult to get Apple and Microsoft to integrate well in the enterprise, the consumerization of technology has driven the need to explore this space. So I put in the resolution of the DNS-IP say . The router (gateway) will be the address of your router (192.168.200.1) and the DNS (Domain-Name-Server) set up with the IPs provided by your ISP: Sometimes OSX requires also the optional Domain-Names. It is set up to Ethernet and then manually with the above mentioned settings. This you will set up in the Network prefpane. you will give your X computer the address manually 192.168.200.2 with the same subnetmask of the router. It depends on how you want to set up your network either DHCP where your ip addresses will be given by the router or manually configured where you will have to specify the addresses for each computer on the network (subnet). Here you will have to give your router a specified IP-address say 192.168.200.1 with a subnetmask set up like 255.255.255.0. If you have set up the WAN correctly you will also have to set up the LAN-configuration. I really am overpowered by the complexity of OS X, let alone coming up to speed with the new GUI. How do I then configure OS X so that I can then use my router? This is all so much doubledegook to me. So that's the router side of things (although there are heaps of other configurable variables in the router). If I select PPPoE I have a choice of also having either VC_MUX or LLC_SNAP (the latter is automatically selected if I choose PPPoE, whereas VC_MUX is automatically selected if I choose PPPoA - it does allow me to change between VC_MUX and LLC_SNAP in both PPPoA and PPPoE options). * Enable Network Address Translation (NAT) (checked) * Fixed WAN IP Address (unchecked - has a space for an IP address * Specified Local WAN IP Address (checked) (then it has the following 2 choices, either one or the other) My router is currently configured as follows: PPPoA, PPPoE) - see attachment for screenshot). What I need to know is what I'm supposed to configure my ADSL router to (i.e. I've been everywhere to work out what I'm supposed to do but can't get any specific info. But if I startup with OS 9 I have no problems connecting. OS 9 won't even connect while running under OS X.
#Fusion 10 configure os x vm nat connection how to#
I have no idea how to configure OS X or the router in order to get online. My router does have a PPPoE option but I've got no idea what any of these things mean. I've been using a Dynalink router to connect to my ISP using PPPoA. I'm running 9.2.2 on my Powerbook internal hard drive. I've just installed OS X - upgraded now to 10.1.2 on a partition on my external FW hard drive.
0 kommentar(er)
